Tools

Use in conjunction with our Star Nut Setter to ensure the star nut is driven in straight. Compatible with 1" and 1 1/8" steerers.

The freewheel remover is used for removing an assembling Campagnolo® freewheels. Use the freewheel remover together with the Unior 1/2" ratchet 190.1ABI

Works on all chains from 5 to 11 speeds

Four sided spoke nipple engagement means fewer rounded off nipples. Offered in two sizes: 3.3mm and 3.45mm to fit most common spoke nipples, the 1630/2P spoke wrench has a plastic dipped handle for comfort and ease of use.

Unior Fork Seal Driver

M10 - frame tap for derailleur hanger (616079) M5 - frame tap for water bottle, fender, rack bosses (616078) M3 - frame tap for rear wheel dropout alignment screws (616077)

Unior, Cartridge BB tool 20 tooth, Bottom Bracket Tool, Cartridge For: Shimano®, ISIS® Material: premium flex plus carbon steel

A must have wheel building tool. Rotating handle and the guide shape enables you to quickly screw the nipple onto the spoke. It supports standard shape nipples.

- These 12" blades are compatible with the Unior hacksaw frame and come in a pack of 2 - Much safer for cutting carbon as it leads to fewer loose strands and leaves a cleaner result

- This chain tool can cover anything from 5 to 11 speed - Its handle doubles in function as a valve core remover for Schrader and Presta valves

- Hex wrenches 4, 5, 6 - TX wrench 25 - PH1 screwdriver - Flat screwdriver 1.0 x 5.0

- Hex wrenches 1.5, 2, 2.5, 3, 4, 5, 6

- Master link pliers are for commonly used chains with master link, SRAM Powerlink or the KMC Missing Link

Spoke wrenches are designed to tighten nipples with flat diameter 3.3mm to 3.45mm.

The head set cup remover makes removal of cups 1-1/4" and 1-1/2" from the frame quick and easy Suitable for removing PressFit 30 (PF30) bottom bracket cups. PF30 bottom bracket cups are pressed into the frame the same way as the head tube cups and have the same internal diameter.

Unior, Bracket Socket 16 Notch, Bottom Bracket Tool, Hollowtech II Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

Unior, Bracket Socket BB9000, Bottom Bracket Tool, BB-9000 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

Unior, Bracket Socket BBR60, Bottom Bracket Tool, BBR60 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

Unior, Bracket Socket BSA30, Bottom Bracket Tool, BSA30 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

Modern replacement of the traditional chain whip Pins on the tool engage with the smallest sprocket on the cassette and hold it in place, while the opening in the middle allows for easy access to the cassette lockring

Material: premium plus carbon steel, drop forged, entirely hardened and tempered, cutting edges induction hardened

Material: premium plus carbon steel, drop forged, entirely hardened and tempered, cutting edges induction hardened

- Quickly and accurately determine the wear and stretch of any chain

Two 15 mm openings set at offset angles to easily remove pedals regardless of the pedal axle position

Used for holding brake and derailleur steel cables and pulling them out of the housing The safety lock is activated with a thumb push. The lock is automatically released by squeezing handles together.

Wrench for rear sprocket with handle is used for Shimano®, SRAM®, Sun Race®, Suntour® and other cassette sprockets.

- Pliers developed specially for cutting shift and break housing. Pliers cut precise and smooth without deformation to the cable housing and feature a build in crimping function for cable end caps. - In order to preserve the ultimate cutting performance, we highly advice not to use pliers for cutting shift/brake wires and spokes.

- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool

- 3/32" chain whip

- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool - Flat screwdriver 1.0 x 5.0 - Spoke Key 3.3, 3.45 and DT