Bontrager's ANT+ Digital Cadence Kit w/Magnet wirelessly transmits your cadence data to a variety of ANT+ enabled receiving devices including Bontrager Node computers (sold separately). Installation is a snap, too.
Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data, and installation is a snap with the included hardware.
Bontrager's Standard ANT+ Digital Speed Sensor conveniently zip ties to any bike fork for the ultimate in convenience. It wirelessly transmits speed data to a variety of ANT+ enabled receiving devices including Bontrager Node computers (sold separately).
When the going gets gnarly, it's a good idea to strap on GoPro's Camera Tethers to further secure your camera. Just stick the adhesive mount to your helmet or other flat object, then wrap the tether around the housing's backdoor to keep your GoPro in place no matter how intense the adventure gets.
With GoPro's Curved and Flat Adhesive Mounts, you can get creative with your mounting options for awesome camera shots on your next adventure! Waterproof and industrial strength, these mounts will stick to flat and curved surfaces, and when you're done it's easy to remove them using a hairdryer.
When the adventure takes you into the water, attach GoPro's Floaty Backdoor for added visibility and flotation. The Waterhousing backdoor keeps your camera dry, while the bright orange Floaty keeps your GoPro camera buoyant and visible.
Capture your ride from new and exciting angles with GoPro's Roll Bar Mount. This larger diameter clamp can be affixed to your bike's top tube or any other place you can fit it! With 3-way adjustable pivoting arms, you can orient your GoPro to capture your most creative shots.
World travelers, rejoice! GoPro's Wall Charger includes adaptors for any wall socket in the world, which means you can charge your GoPro camera twice as fast, anywhere. With Dual USB ports for charging two cameras at once, you can get your gear ready to go when you're pressed for time, and you can even begin recording while charging. It's compatible with all GoPro cameras and will even work with most devices that can be charged via USB.
Polar's Wearlink+ Strap is the correct strap for your Polar wireless Wearlink+ transmitter. It's easy to install and comfortable to wear.
Polar's WearLink+ Transmitter sends heart rate data to your wrist unit. It's secured by a comfortable, adjustable elastic strap and is coded to prevent interference with other heart-rate monitors in the vicinity.
Let Rokform keep your iPhone safe and secure. The Rokform V.3 is more than just a protective case, it's part of a complete system of protection. Made from reinforced polycarbonate, the V.3 is tough enough for your active lifestyle. Rokform's unique mounting lock is integrated into the case itself for quick, rock solid attachment to the included handlebar mount. The lever lock handlebar mount snaps easily to your bars for a fast and effective hands-free setup that keeps your phone visible and accessible. iPhone 6, 5/5s, 5c, 4/4s Bike Handlebar Mount Kit Includes: • Bike Handlebar Mount • V.3 Mountable and Protective Case • Removable Hi-Tensile Wrist Lanyard • Weatherproof Bag
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor
- Replacement parts and accessories for SpeedTrap Digital Speed Sensor - Fork Cap covers SpeedTrap pocket when sensor is removed - Spacer is required on some forks to position sensor closer to wheel magnet
Cadence Magnet for all CatEye computers that record cadence.
Key features - Replacement parts and accessories for DuoTrap S Digital Sensor - DuoTrap S Mounting Kit includes frame grommets and bolt - Frame Covers can be model-specific
Frame Cover fills chainstay pocket when sensor is removed.
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal crank magnets work with any cadence sensor - Get the perfectly sized magnet, sized right for your bike and sensor - 20mm cadence magnet improves signal for wider gaps between crank and sensor
Get a clear view of the road ahead, thanks to Thule's Pack n' Pedal Light Holder. This clever accessory organizes your headlight, battery, and wires into a single attachment that's a snap to install and remove. Use it with Thule's Handlebar Mount (sold separately) to give yourself tons of lighting options for early-morning commutes and late-night trail rides.
Mount your Garmin Edge computer with the Quarter Turn Bike Mount. It includes the bike mount, rubber disc, and elastic bands to secure the Quarter Turn to your stem or handlebars.
Keep your training on track—and be stylish—with Garmin's Replacement Band for your Forerunner 735XT. Bands come with spare pins, 2 screwdrivers for pin removal, and instructions.
- Compatible with Super Record, Record, and Athena EPS systems - Required for use with the charger and works with V2 systems - USA/North America plug - adapters required for other countries
CatEye's Out Front Bracket frees up your handlebars and positions your favorite CatEye computer just in front of your stem for optimal viewing and accessibility.
Quickly and easily swap your Bontrager or Trek cycling computers and wireless sensors between bicycles without tools with these silicone mounting straps. Large and small sizes ensure proper fit on most forks. • Designed for Bontrager and Trek analog wireless computers • Interchange analog wireless sensor installs and removes in seconds without tools • Interchange sensor includes both L and S silicone mounting straps to fit most forks • Batteries can be found in computer accessories
Easily mount your computer in the fastest, most aero position possible with the Bontrager Speed Concept Mount. • Computer mount for the 2014 Speed Concept • Mounts to all mono extensions creating a faux bar for any standard handlebar-mount cycling computer
Take your smartphone along for the ride with Thule's Pack 'n Pedal Smartphone Attachment. Conforming side grips keep your phone securely in place and provide access to phone controls. It also rotates a full 360 degrees for vertical or landscape viewing. The Smartphone Attachment requires Thule's Handlebar Mount (sold separately).
Make sure you get pictures of all the action! Thule's Pack n' Pedal Action Cam Mount lets you securely and safely mount a digital camera to your handlebars so you can record your rides. The durable mount keeps the camera securely positioned through all types of riding conditions, and multiple position options mean the camera won't interfere with the rider. This mount includes a GoPro-specific mounting plate, but works with nearly every action camera thanks to the included adhesive adapter plate. The Action Cam Mount requires Thule's Handlebar Mount (sold separately).
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin High Mount for a clean, flush look that securely holds your Garmin centered over the stem. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin Low Mount to add a Garmin GPS directly to the Blendr stem mount. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Page 1 of 3 Next page